Machine
size:
|
Length: 42” x Width: 30”
x Height: 72”,
*Note-Height includes the machine indicator
lights |
| Electrical requirements: |
220 Volts, 30 Amps, 50/60 Hz, 1 Phase, or
120 Volts, 60 Amps, 50/60Hz, 1 Phase |
| Electropolishing Circuit: |
Volts: 48, Output Current: 32 Amps
Dedicated Electropolishing Programmable Power
Supply |
Tank volume:
(standard EP10) |
10 US Gallons (37.85 Liter) |
Tank Dimensions
(standard 10-USG) |
Width: 17.5" x Depth: 15.5" x
Height: 8"
See
the "Open Polishing Area" tank illustration |
| Heating power: |
2000 Watt (2x 1000 Watt Heating Coils) |
| Operating temperature
range: |
120º F to 180º F (48.8 C to 82.2 C) |
| Temperature accuracy: |
+/- 1º F (+/- 0.55 C) |
| *Chiller power: |
1/3 hp, 4050 BTU/Hr |
| *Cooling tank capacity: |
3 US Gallons (11.35 Liter) |
| *Cooling flow rate: |
Circulation through bath: 10 US Gallons
pr minute
Recirculation through chiller: 5 US Gallons
pr. minute |
| Heavy duty stainless
steel unibody construction with stainless
leveling feet and ventilation hood |
| CPVC table top |
| Polypropylene
tank with splash guarding on sides and rear |
| *Single or two
up parts processing (requires addition of
second power supply) |
| Operation indicator
stack lights |
| *Teflon coated
stainless steel cooling coil |
| Dual tank heating
elements |
| Dual tank impellers
(agitation) |
| Custom engineering
and configurations available upon request |
